Alera-lighting CPLS - Arch Sensors Manual de usuario descargar pdf (Pagina 2)

Page 2/2 Rev. 08/28/12 curves / CPLS ARCHITECTURAL SENSORS TID

Curv Plus liso

Installed Architectural Sensors Technical Installation Data

without notice. 701 Millennium Blvd. Greenville, SC 29607 / Tel 864.678.1000 / Website www.aleralighting.com

suspension attachMent

Suspension Instructions:

1. Set bottom nuts to desired xture height.

2. Adjust upper nuts for a minimum of ⅜"

between upper and lower nuts.

3. Slide cable hanger into hanger slots.

4. Secure and tighten upper nuts.

FixtuRe connections

Connection Instructions:

1. Install rst xture of row with two hangers.

2. Slide inner die cast plates together.

3. Secure xture joints with two bolts and nuts

and attach hanger at opposite end.

4. Repeat steps 2 and 3 until row is complete.

5. At each end of the row, attach and align end

cap with two screws.

Center upper reector and clip directly onto lamps.

1 2

Sin comentarios

Alera-lighting CPLS - Arch Sensors Manual de usuario Pagina 2